GIVI
THESI 310
Single-axis position controller
THESI 320
Two-axis position controller
▪ THESI 320 position controller can control shifting and positioning of two axes in 3   different operating modes:
  - MANUAL or SEMI-AUTOMATIC by keyboard.
  - AUTOMATIC on the basis of a memorized program.
▪ End of program output.
▪ Independent axes as for confi gurations and parameters.
▪ 3 generic auxiliary inputs.
▪ Memorization of up to 99 PROGRAMS with 20 positions each. Up to 99
  repetitions can be matched to each position (the program cycle is composed by the position & repetitions).
▪ 90 Vac to 230 Vac power supply or 24 Vac power supply with selector.
▪ Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in   single - chip mode.
▪ Optoisolated inputs
  START, STOP, INCREASE CYCLE, DEVIATION, PRESET.
▪ Voltage-free contact outputs
  OK POSITION, ENABLING WITH CONTROL INTERLOCK
  FEED / BACK, SLOW / FAST.
▪ ± 10 Vdc analog output
  FEED / BACK, SLOW / FAST.
▪ Can be installed on bench or built in.
THESI 320 DI   With relay outputs (digital)
Display
POSITION: 6 high-efficiency digits
h = 13 mm and negative sign
CYCLES: 2 high-efficiency digits
h = 13 mm
PROGRAMS: 2 high-efficiency digits
h = 13 mm
Signal input per axis
2 square waves out of phase 90° ± 10° and zero ref.
Axis input frequency
20 kHzMAX
Linear resolution
200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm
Protection class
keyboard IP 65   rear panel IP 40
Encoder power supply
5 Vdc or 12 Vdc 120 mAMAX
Power
10 WMAX
Power supply
90 to 230 Vac ± 10% - 50/60 Hz
24 Vac ± 10% - 50/60 Hz
Digital outputs
N.O. relay contacts
Inputs
optoisolated
Connections
by removable terminal block
Dimensions
front panel: 100x193 mm – depth:: 135 mm
THESI 320 AN   With analog output
Display
POSITION: 6 high-efficiency digits
h = 13 mm and negative sign
CYCLES: 2 high-efficiency digits
h = 13 mm
PROGRAMS: 2 high-efficiency digits
h = 13 mm
Signal input per axis
2 square waves out of phase 90° ± 10° and zero ref.
Axis input frequency
20 kHzMAX
Linear resolution
200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm
Protection class
keyboard IP 65   rear panel IP 40
Encoder power supply
5 Vdc or 12 Vdc 120 mAMAX
Power
10 WMAX
Power supply
90 to 230 Vac ± 10% - 50/60 Hz
24 Vac ± 10% - 50/60 Hz
Analog output
± 10 Vdc optoisolated
Inputs
optoisolated
Connections
by removable terminal block
Dimensions
front panel: 100x193 mm – depth:: 135 mm